VICTRON ENERGY
Orion-Tr Smart 24V to 12V-30A (360W) Non-Isolated DC-DC Charger
Orion-Tr Smart 24V to 12V-30A (360W) Non-Isolated DC-DC Charger
SKU:ORI241236140
Couldn't load pickup availability
⚡ Victron Orion-Tr Smart 24V to 12V 30A Non-Isolated DC-DC Charger — 360W
Smart non-isolated 24V to 12V DC-DC charger with 30A output, Bluetooth monitoring, adaptive 3-stage charging, smart alternator compatibility, remote on/off, IP43 protection, and programmable output via VictronConnect.
The Victron Orion-Tr Smart 24V to 12V 30A Non-Isolated DC-DC Charger is designed to provide controlled charging for 12V service batteries from a 24V input source, or to operate as a constant voltage power supply.
With a wide input voltage range, Bluetooth Smart connectivity, programmable charging, and configuration through the VictronConnect App, the Orion-Tr Smart charger is ideal for 24V vehicle systems, marine installations, caravans, RVs, commercial vehicles, and auxiliary battery systems where accurate voltage control is required.
It is especially useful in systems where alternator voltage behaviour or long cable runs can prevent a service battery from charging correctly. The built-in engine shutdown detection helps protect the starter/input battery from unwanted discharge when the engine is not running.
✅ Key Benefits
⚡ 24V to 12V DC-DC Charging
Designed to charge a 12V service or auxiliary battery from a 24V input battery or vehicle electrical system.
🔋 30A Continuous Output Current
Provides up to 30A output current at nominal output voltage and 40°C.
📲 Bluetooth Smart Enabled
Monitor, configure, and update the charger using the VictronConnect App on a compatible smartphone, tablet, or Bluetooth-enabled device.
🔧 Fully Programmable Operation
Configure the battery charge algorithm or use the unit as a fixed output power supply.
🚙 Smart Alternator Compatible
Built-in engine running detection supports vehicles with Euro 5 and Euro 6 smart alternators.
🔄 Adaptive 3-Stage Charging
Supports bulk, absorption, and float charging for controlled battery charging.
🔌 Power Supply Mode
Can be used as a constant voltage source, with output voltage set via Bluetooth.
🛡️ Starter/Input Battery Protection
Engine shutdown detection helps prevent unwanted discharge of the starter or input battery when the engine is not running.
🔘 Remote On/Off Control
Allows connection of a remote switch or relay contact for external control.
➕ Parallel Connection Supported
Multiple units can be connected in parallel to increase output current.
🌡️ High Temperature Protected
Output current reduces at high ambient temperatures to help protect the unit.
🧰 Screw Terminal Installation
Screw terminals allow installation without special tools.
🚐 Suitable Applications
🚚 24V commercial vehicle systems
🚙 24V to 12V auxiliary charging systems
🚐 Caravans and RVs
⛵ Boats and marine systems
🛻 4WD touring setups with 24V systems
🔋 12V auxiliary battery charging
⚡ Service battery systems
🚗 Euro 5 and Euro 6 smart alternator vehicles
🏕️ Camping and touring electrical systems
🔌 Constant voltage power supply applications
📲 Bluetooth Smart & VictronConnect
The Orion-Tr Smart charger includes Bluetooth Smart functionality for convenient monitoring, setup, and firmware updates.
| Bluetooth Feature | Details |
|---|---|
| App Support | VictronConnect App |
| Monitoring | View charger status from a compatible device |
| Settings Control | Change charger settings via Bluetooth |
| Firmware Updates | Update the charger when new software features become available |
| Instant Readout | View key data, warnings, and alarms on the device list page without connecting to the product |
🔋 Adaptive Battery Charging
The Orion-Tr Smart supports an adaptive 3-stage charge algorithm for controlled battery charging.
| Charging Stage | Function |
|---|---|
| Bulk | Provides high current charging to recover battery capacity |
| Absorption | Maintains charging voltage to complete battery charging |
| Float | Maintains battery voltage after charging is complete |
For lead acid batteries, absorption time is automatically adjusted. During shallow discharges, absorption time is kept short to help prevent overcharging. After deep discharges, absorption time is increased to help fully recharge the battery.
For lithium batteries, absorption time is fixed, with a default of 2 hours.
🚙 Smart Alternator Compatibility
The Orion-Tr Smart is suitable for vehicles with smart alternators, including many Euro 5 and Euro 6 engine systems.
| Smart Alternator Feature | Details |
|---|---|
| Engine Running Detection | Built-in mechanism detects when the engine is running |
| Starter/Input Battery Protection | Stops the converter when the engine is not running |
| Smart Alternator Support | Helps maintain controlled auxiliary charging where alternator voltage varies |
| Voltage Drop Support | Helps compensate for voltage drop from long cable runs |
This makes it useful for boats, RVs, caravans, 24V touring vehicles, and commercial vehicle systems where long cable lengths can reduce charging voltage.
🔘 Remote On/Off Control
The Orion-Tr Smart includes a remote on/off connection for external switching.
| Remote Feature | Details |
|---|---|
| Remote Switch Input | Remote on/off switch or relay contact can be connected |
| Connector Type | Two-pole connector |
| H Terminal Option | Can be switched to battery positive |
| L Terminal Option | Can be switched to battery negative or vehicle chassis |
⚡ Electrical Specifications
| Electrical Specification | Details |
|---|---|
| Product | Victron Orion-Tr Smart 24V to 12V 30A Non-Isolated DC-DC Charger |
| Input Voltage Range | 20–35V |
| Under Voltage Shutdown | 14V |
| Under Voltage Restart | 15V |
| Nominal Output Voltage | 12.2V |
| Output Voltage Adjustment Range | 10–15V |
| Continuous Output Current at 40°C | 30A |
| Short Circuit Output Current | 60A |
| Continuous Output Power at 25°C | 430W |
| Continuous Output Power at 40°C | 360W |
| Efficiency | 88% |
| Power Supply Mode | Yes, output voltage can be set with Bluetooth |
🌡️ Operating Protection
| Protection Feature | Details |
|---|---|
| High Temperature Protection | Output current reduces at high ambient temperature |
| Short Circuit Protection | Short circuit proof |
| Parallel Operation | Unlimited units can be connected in parallel |
| Operating Temperature Range | -20°C to +55°C |
| Temperature Derating | Derates 3% per °C above 40°C |
| Input Fuse | Built-in, not replaceable |
🧰 Installation Details
| Installation Feature | Details |
|---|---|
| DC Connection | Screw terminals |
| Maximum Cable Cross-Section | 16mm² |
| Cable Equivalent | 6 AWG / 6 B&S |
| Special Tools Required | No |
| Protection Category | IP43 electronic components / IP22 connection area |
| IP43 Condition | When installed with screw terminals facing downwards |
📏 Technical Specifications
| Specification | Details |
|---|---|
| Product | Victron Orion-Tr Smart 24V to 12V 30A Non-Isolated DC-DC Charger |
| Charger Type | Non-isolated DC-DC charger / power supply |
| Input Voltage | 24V nominal |
| Output Voltage | 12V nominal |
| Output Current | 30A |
| Output Power | 360W at 40°C / 430W at 25°C |
| Input Voltage Range | 20–35V |
| Output Voltage Range | 10–15V |
| Charge Algorithm | Adaptive 3-stage: bulk, absorption, float |
| Bluetooth | Yes |
| Smart Alternator Compatible | Yes |
| Remote On/Off | Yes |
| Parallel Connection | Supported |
| Efficiency | 88% |
| Operating Temperature | -20°C to +55°C |
| DC Connection | Screw terminals |
| Maximum Cable Size | 16mm² / 6 AWG / 6 B&S |
| Protection Category | IP43 / IP22 connection area |
📐 Dimensions & Weight
| Measurement | Details |
|---|---|
| Height | 130mm |
| Width | 186mm |
| Depth | 80mm |
| Weight | 1.3kg |
⚠️ Fitment & Installation Note
Please confirm your required input voltage, output voltage, auxiliary battery type, charge profile, alternator type, cable size, fuse protection, mounting location, ventilation, remote switching requirements, and VictronConnect setup before purchase or installation.
Important:
✅ 24V to 12V non-isolated DC-DC charger
✅ 30A output current
✅ 360W continuous output power at 40°C
✅ Bluetooth Smart enabled
✅ VictronConnect configuration and monitoring
✅ Adaptive 3-stage charging
✅ Suitable for smart alternator vehicles
✅ Can be used as a fixed output power supply
✅ Remote on/off capable
✅ Short circuit proof
✅ Parallel connection supported
✅ Screw terminal installation
⛔ Input fuse is not replaceable
⛔ IP43 rating applies when screw terminals are installed facing downwards
⛔ Confirm system compatibility before using in isolated or mixed-ground installations
⛔ Professional installation is recommended for vehicle, marine, and auxiliary battery systems
🔎 Why Choose the Victron Orion-Tr Smart 24V to 12V 30A Charger?
The Victron Orion-Tr Smart 24V to 12V 30A Non-Isolated DC-DC Charger is designed for users who need accurate, programmable 12V auxiliary battery charging from a 24V input system.
With Bluetooth Smart monitoring, VictronConnect configuration, adaptive 3-stage charging, smart alternator compatibility, remote on/off control, power supply mode, 30A output, 88% efficiency, and parallel capability, it is a strong choice for controlled 24V to 12V charging where alternator voltage or cable voltage drop may otherwise limit charging performance.
📦 What’s Included
⚡ 1 x Victron Orion-Tr Smart 24V to 12V 30A Non-Isolated DC-DC Charger — 360W
🛒 Order with Confidence
Choose the Victron Orion-Tr Smart 24V to 12V 30A Non-Isolated DC-DC Charger for reliable 24V to 12V auxiliary battery charging, smart alternator compatibility, Bluetooth configuration, adaptive charging, starter/input battery protection, and dependable DC-DC power management.
Share

SS - Product Addons
Select product(s) to see addons appear.
This message only appears in theme editor.