THUMPER
THUMPER REDARC DC-DC CORE BATTERY BOX + THUMPER 100AH LITHIUM + 8MM CIRCUIT BREAKER LOOM KIT
THUMPER REDARC DC-DC CORE BATTERY BOX + THUMPER 100AH LITHIUM + 8MM CIRCUIT BREAKER LOOM KIT
SKU:BBG-DCRD-CORE+TL-100BT+L
This box is not waterproof - designed for IN CABIN use only. Please look at our REDARC CLASSIC or REDARC DELUXE box for waterproof options
...
What is the difference between the CORE and the STANDARD Redarc BCDC1225? The Redarc CORE DC charger has been designed for strictly IN CABIN use! This DC charger is not designed to be mounted in locations exposed to moisture or harsh conditions. This particular battery box combination is perfect for the use INSIDE the vehicle or in a Caravan. |
Built with the Redarc BCDCN1225 DC charger |
Designed to suit new model vehicles with smart / variable alternators |
|
|
|
|
|
|
|
|
This particular model suits a DUAL CHEMISTRY of both Lithium & AGM:
1X |
Redarc BCDC1225D 25Amp DC Battery charger (solar and vehicle compatible charge) - suitable for Lithium / Gel / AGM / Calcium |
2X | Marine grade Cigarette socket - rated to 16 Amps Includes rubber cap design to protect all sockets |
1X |
Engel Fridge type socket (2 prong design) - rated to 16 Amps |
1X | Dual USB socket - rated to 2.2Amp (min rating) - used to illuminate the Volt meter gauge and activate the USB |
2X | 50 Amp Anderson connectors - Labelled INPUT/OUTPUT (one fitted to front of box and one on rear) |
1X | 50 Amp Anderson connectors - designed purely for solar panel input - labelled "Unregulated solar input" |
1X | 50 Amp Anderson connectors - designed purely for vehicle (alternator) input - labelled "Alternator input" |
1X | All internal cabling to allow you to simply connect straight to the battery terminals |
1 | 3 year manufacturing warranty |
Length |
330 mm |
Width | 183 mm |
Height | 220 mm (Base only - Lid allows more height) |
Length |
410 mm |
Width | 260 mm |
Height | 280 mm |
The Loom includes:
(for vehicle charge line) WITH 50 Amp Anderson fitted
1 x 50Amp Automatic reset circuit breaker
(for connection off main vehicle battery for the charge line)
1 x 50 Amp Anderson connector (Genuine)
1 x 2 Pin ignition wire loom with 6mt cable
Thumper 100AH Lithium LiFePO4 Battery
Thumper Lithium LiFePO4 batteries are fully sealed and are designed to be mounted on any angle for easy application.
Equipped with an internal battery management system (BMS), the Thumper Lithium offers safe charging and discharging with over temperature protection, under and over voltage cut off protection and also internal short circuit protection.
The LiFePO4 range of batteries are less than half the weight of a traditional AGM battery, whilst still offering all of the benefits of a heavy duty deep cycle.
These batteries are designed to hold the terminal voltage higher throughout each cycle, resulting in an increase depth of discharge and a longer overall run time with heavier draw appliances.
Features:
• Less than half the weight of a traditional lead acid battery
• Higher voltage maintained for longer run times with appliances
• Proven quality and reliability
• Compatible with chargers with an AGM or lithium setting
• For best results: Use of a lithium charger is recommended
• 3 year warranty
• Increased cycles compared to traditional lead acid
• Designed to be wired parallel
• Parallel connection is non-limited
• This battery is NOT designed for series linking
• This battery is NOT designed for starting purposes
• This battery is NOT designed for under bonnet application
Technical Specifications:
Model No. | TL-100 |
Nominal Voltage | 12.8 V |
Rated Capacity | 100 AH |
Cell Type / Chemistry | Prismatic / LiFePO4 |
Dimensions and Weight:
Length | 328 mm |
Width | 172 mm |
Height (Total) | 220 mm |
Weight | 11.2 Kg |
Operating Temperature Range:
BMS High temp cut out / Reconnect | 80˚C / 50˚C |
Discharge | -20˚C ~ 60˚C |
Charge | -20˚C ~ 45˚C |
Storage | -5˚C ~ 35˚C |
Charging Methods:
Recommended Charge Current | 10 ~ 50 Amps |
Max Charge Current | 70 Amps |
Discharge:
Max discharge current (continuous) | 100 Amps |
Peak discharge current (1-3 seconds) | 300 Amps |
BMS Current cut off | >100.5A 10s |
BMS Current cut off | >120.0A 3s |
BMS Current cut off | >150.0A 1s |
BMS Voltage cut off / Reconnect | 10.0V / 12.0V |
Self Discharge per month: | ≤3% |
Warranty | 3 years from date of purchase |