12V 5AH Multi-Purpose AGM Battery (ES1250)

🔋 PREDATOR ES1250 MULTI-PURPOSE AGM BATTERY – 12V 5AH

General-Purpose VRLA AGM Battery – 12V, 5Ah C20 Capacity, Maintenance-Free Construction & Standby / Light-Cycling Capability

⚡ The Predator ES1250 is a compact 12V 5Ah Absorbent Glass Mat battery designed for everyday general-purpose, standby, float and light-cycling applications.

Part of the Predator ES range, the ES1250 uses VRLA AGM construction with compressible glass mat separators positioned between the battery plates. These separators retain the electrolyte required for the battery’s internal chemical reaction while helping reduce internal resistance and improve overall operating efficiency.

Its 5Ah C20 capacity, maintenance-free construction, low self-discharge characteristics and high-strength ABS casing make it suitable for a broad range of compatible electronic, backup-power, automation, security, telecom and control applications.

The supplied product information also states that the Predator ES range is approved under the CSIRO ActivFire Scheme and listed in the Register of Fire Protection Equipment for fire panels and systems.

---

⚡ KEY FEATURES

🔋 12V 5Ah AGM Battery
Provides a nominal 12V output with a supplied 20-hour rated capacity of 5Ah.

🛡️ VRLA Construction
Valve Regulated Lead Acid construction is designed to prevent electrolyte leakage from the battery casing or terminals under normal operating conditions.

🧰 Maintenance-Free Operation
No routine water checking or electrolyte topping-up is required.

🔄 General & Light-Cycling Use
Designed for everyday general-purpose battery duties and light cycling.

⚡ Standby & Float Applications
Well suited to compatible standby and float-use systems including UPS, emergency lighting, security and control equipment.

💧 AGM Electrolyte Retention
Compressible glass mat separators retain the electrolyte required for the battery’s internal chemical reaction.

📉 Low Self-Discharge
Designed with a low self-discharge rate to support standby reliability and useful shelf life.

🧪 99.9% Fine-Grain Lead
The supplied information states that 99.9% lead is used to create grids with a stronger grain structure and higher resistance to corrosion.

🧱 High-Strength ABS Casing
Designed to withstand elevated operating temperatures and maintain high battery cell compression for reliable operation.

⚡ Internal Resistance ≤30mΩ
The supplied specification lists internal resistance of no more than 30mΩ when fully charged.

🔥 ActivFire Approved Range
The supplied product information states that the Predator ES range is approved under the CSIRO ActivFire Scheme and listed in the Register of Fire Protection Equipment for fire panels and systems.

↔️ Flexible Operating Orientation
The supplied information states that the battery can operate in any orientation except inverted.

---

🔋 GENERAL-PURPOSE 12V AGM POWER

The Predator ES1250 is designed for applications requiring a sealed 12V battery for standby, float or light-cycling duties.

Unlike a conventional serviceable flooded battery, the ES1250 uses AGM construction and requires no routine electrolyte maintenance.

Its supplied 5Ah C20 capacity provides useful stored energy for compatible low-voltage equipment, backup systems and general-purpose electrical applications.

---

🛡️ VRLA AGM CONSTRUCTION

The ES1250 uses Valve Regulated Lead Acid and Absorbent Glass Mat construction.

Compressible glass mat separators are positioned between the battery plates and retain the electrolyte required for the internal electrochemical reaction.

The supplied information states that this design reduces internal resistance and improves overall battery efficiency.

• VRLA construction
• AGM electrolyte retention
• Maintenance-free operation
• Reduced leakage risk under normal use
• Low self-discharge
• Compact 12V battery format

---

🔌 5AH C20 CAPACITY

Nominal voltage: 12V

20-hour rated capacity: 5Ah

The supplied 5Ah capacity is based on the 20-hour discharge rate.

Actual runtime will vary according to electrical load, battery condition, state of charge, operating temperature and the equipment’s discharge cutoff voltage.

---

📊 CAPACITY AT DIFFERENT DISCHARGE RATES

20-hour rate: 5Ah

10-hour rate: 4.8Ah at supplied discharge value of 9.0A

5-hour rate: 4.45Ah at supplied discharge value of 15.9A

1-hour rate: 3.3Ah at supplied discharge value of 55.4A

⚠️ IMPORTANT: The 9.0A, 15.9A and 55.4A discharge-current figures above are reproduced exactly from the supplied source. They should be checked against the manufacturer’s current technical datasheet before being used for engineering calculations, runtime estimates or battery sizing.

---

🔄 STANDBY / FLOAT USE

The ES1250 is particularly suited to compatible standby and float applications where the battery remains connected to a controlled charging source for extended periods.

Supplied float-use voltage:

13.6V–13.8V at 25°C

⚠️ IMPORTANT: Use a charger or power supply designed for sealed AGM / VRLA batteries and capable of maintaining the specified float voltage.

---

🔁 CYCLE USE

The Predator ES1250 can also be used for compatible light-cycling applications.

Supplied cycle-use voltage:

14.4V–14.9V at 25°C

Recommended charge current:

0.50A @ 12V

Maximum emergency charge current:

1.25A @ 12V

⚠️ IMPORTANT: Charging voltage and current must be controlled appropriately for AGM battery chemistry. Do not exceed the supplied charging limits.

---

📉 LOW SELF-DISCHARGE

The supplied specification states greater than 90% remaining capacity after three months at 25°C.

This low self-discharge characteristic helps make the ES1250 suitable for compatible standby systems and equipment that may remain unused for extended periods.

Storage temperature, battery condition and state of charge can affect capacity retention.

---

⚡ INTERNAL RESISTANCE

Supplied internal resistance:

Fully charged battery: ≤30mΩ

Internal resistance influences how efficiently a battery can deliver current to a connected load. The supplied value applies to the battery in a fully charged condition.

---

🧪 HIGH-PURITY FINE-GRAIN LEAD

The supplied product information states that the Predator ES range uses 99.9% lead to create grids with a stronger grain structure and higher resistance to corrosion.

This construction is intended to support dependable operation across general-purpose, standby and light-cycling applications.

---

🧱 HIGH-STRENGTH ABS CASING

The ES1250 uses an ABS battery casing.

The supplied information states that the casing is designed to withstand elevated operating temperatures while maintaining high battery cell compression, which is important for reliable battery operation.

---

🔥 CSIRO ACTIVFIRE SCHEME

The supplied product information states that the Predator ES battery range is approved under the CSIRO ActivFire Scheme and listed in the Register of Fire Protection Equipment for fire panels and systems.

This makes the range relevant to compatible fire-panel and fire-system applications where the applicable equipment specification accepts this battery.

⚠️ IMPORTANT: ActivFire approval of the range does not automatically confirm suitability for every fire panel or fire-protection system. Always check the specific equipment manufacturer’s battery requirements.

---

🌡️ OPERATING & STORAGE TEMPERATURE

Discharge temperature: -35°C to 50°C

Charge temperature: -15°C to 40°C

Storage temperature: -15°C to 40°C

⚠️ IMPORTANT: Battery performance, charge acceptance and service life can be affected by temperature. Operate, charge and store the battery within the supplied temperature limits.

---

🔧 SUITABLE APPLICATIONS

• 🧸 Electronic toys and equipment
• 🛴 Compatible e-scooters and bikes
• 🚨 Emergency lighting
• 💡 Electronic light displays
• 🔌 UPS systems
• ⚙️ Automation systems
• 🔐 Security systems
• 🥤 Vending machines
• 🎛️ Control equipment
• 🚗 Compatible electric-vehicle applications
• ☀️ Compatible solar power systems
• 🌬️ Compatible wind-power systems
• 📡 Telecom systems
• 🏥 Compatible medical applications
• 🔥 Compatible fire panels and fire systems

---

📏 DIMENSIONS & WEIGHT

Length: 90mm

Width: 70mm

Height: 101mm

Total height: 107mm

Weight: Approximately 1.63kg

Casing material: ABS

---

📋 TECHNICAL SPECIFICATIONS

Brand / Range: Predator ES

Model: ES1250

Battery type: Multi-Purpose AGM / VRLA

Nominal voltage: 12V

20-hour capacity: 5Ah

10-hour capacity: 4.8Ah

10-hour supplied discharge figure: 9.0A

5-hour capacity: 4.45Ah

5-hour supplied discharge figure: 15.9A

1-hour capacity: 3.3Ah

1-hour supplied discharge figure: 55.4A

Length: 90mm

Width: 70mm

Height: 101mm

Total height: 107mm

Weight: Approximately 1.63kg

Casing material: ABS

Self-discharge at 25°C: Greater than 90% remaining after 3 months according to supplied information

Internal resistance: ≤30mΩ when fully charged

Discharge temperature range: -35°C to 50°C

Charge temperature range: -15°C to 40°C

Storage temperature range: -15°C to 40°C

Float-use voltage: 13.6V–13.8V at 25°C

Cycle-use voltage: 14.4V–14.9V at 25°C

Recommended charge current: 0.50A @ 12V

Maximum emergency charge current: 1.25A @ 12V

Construction: VRLA AGM

Lead purity: 99.9% according to supplied product information

---

⚠️ INSTALLATION & COMPATIBILITY CHECKLIST

Before purchasing the Predator ES1250, confirm that the battery matches the electrical, physical and charging requirements of your equipment.

• 12V system compatibility
• Required 5Ah C20 capacity
• Battery dimensions and available installation space
• Terminal arrangement and connection requirements
• Required discharge current
• Required runtime
• AGM / VRLA charging compatibility
• Float-voltage requirements
• Cycle-charge voltage requirements
• Operating-temperature requirements
• Equipment manufacturer battery specification

⚠️ IMPORTANT: The supplied information does not specify the terminal type or terminal dimensions for this ES1250 listing. Confirm the physical terminal arrangement before purchase.

⚠️ IMPORTANT: Do not substitute a battery based on voltage and Ah rating alone. Physical dimensions, terminal configuration, charging requirements and discharge capability must also be compatible.

⚠️ IMPORTANT: The supplied information states that the battery may be operated in any orientation except inverted.

---

❓ FREQUENTLY ASKED QUESTIONS

What is the Predator ES1250?

The ES1250 is a 12V 5Ah VRLA AGM battery designed for general-purpose, standby, float and light-cycling applications.

What voltage is the ES1250?

The nominal voltage is 12V.

What is the rated capacity?

The supplied 20-hour capacity rating is 5Ah.

What is the 10-hour capacity?

The supplied 10-hour capacity is 4.8Ah.

What is the 5-hour capacity?

The supplied 5-hour capacity is 4.45Ah.

What is the 1-hour capacity?

The supplied 1-hour capacity is 3.3Ah.

Are the supplied discharge-current figures confirmed?

The source lists 9.0A for the 10-hour rate, 15.9A for the 5-hour rate and 55.4A for the 1-hour rate. These figures have been retained exactly as supplied and should be checked against the manufacturer’s current technical datasheet before being used for electrical calculations, runtime estimates or battery sizing.

Is the ES1250 AGM?

Yes. It uses Absorbent Glass Mat construction.

Is it a VRLA battery?

Yes. The supplied product information identifies the Predator ES range as using VRLA construction.

Is it maintenance free?

Yes. No routine water checking or electrolyte topping-up is required.

Can the ES1250 operate on its side?

The supplied information states that it can operate in any orientation except inverted, subject to correct equipment installation requirements.

What is the recommended charging current?

The supplied recommended charge current is 0.50A at 12V.

What is the maximum emergency charge current?

The supplied maximum emergency charge current is 1.25A at 12V.

What voltage should be used for float charging?

The supplied float-use voltage range is 13.6V to 13.8V at 25°C.

What voltage should be used for cycle charging?

The supplied cycle-use voltage range is 14.4V to 14.9V at 25°C.

What is the internal resistance?

The supplied internal resistance is no more than 30mΩ when fully charged.

What is the self-discharge specification?

The supplied specification states greater than 90% remaining capacity after three months at 25°C.

Can it be used in a UPS?

Yes. UPS systems are specifically included in the supplied application list, subject to electrical and physical compatibility.

Can it be used for emergency lighting?

Yes. Emergency lighting is specifically listed as an application for the Predator ES range.

Can it be used in security systems?

Yes. Security systems are included in the supplied application list.

Can it be used in fire panels?

The supplied product information states that the Predator ES range is approved under the CSIRO ActivFire Scheme and listed for fire panels and systems. Compatibility with the specific fire panel must still be confirmed.

Can it be used in solar applications?

Yes. Solar power is included in the supplied applications, subject to correct 12V system design, suitable AGM charging and compatible cycling requirements.

Can it be used for wind-power systems?

Yes. Wind power is included in the supplied application information, subject to correct voltage, charging and battery-capacity requirements.

Can it be used in telecom systems?

Yes. Telecom systems are specifically included in the supplied applications.

Can it be used with medical equipment?

Medical applications are included in the supplied application information. Compatibility with the specific equipment and its battery requirements must be confirmed.

Can it be used in an electric vehicle?

Electric vehicle applications are included in the supplied application information. The ES1250 should only be used where its 12V voltage, capacity, dimensions, discharge capability and charging requirements match the equipment specification.

What is the discharge temperature range?

The supplied discharge temperature range is -35°C to 50°C.

What is the charging temperature range?

The supplied charging temperature range is -15°C to 40°C.

What is the storage temperature range?

The supplied storage temperature range is -15°C to 40°C.

What are the battery dimensions?

The supplied dimensions are 90mm long, 70mm wide and 101mm high, with a total height of 107mm.

How much does the ES1250 weigh?

The supplied weight is approximately 1.63kg.

What casing material is used?

The supplied casing material is ABS.

What terminal type does the ES1250 use?

The supplied information does not specify the terminal type or terminal dimensions, so these should be confirmed before purchase.

What should I check before replacing an existing battery?

Confirm the 12V voltage, required 5Ah capacity, physical dimensions, terminal arrangement, charger compatibility, operating-temperature requirements and equipment manufacturer specifications before installation.

---

🔋 DEPENDABLE 12V AGM POWER FOR STANDBY, BACKUP & LIGHT-CYCLING APPLICATIONS

Choose the Predator ES1250 when you need a compact 12V AGM battery for compatible standby, float, backup-power or light-cycling equipment.

With a 5Ah C20 capacity, VRLA AGM construction, greater than 90% supplied three-month capacity retention at 25°C, ≤30mΩ internal resistance, maintenance-free operation and a high-strength ABS casing, the ES1250 is designed to provide dependable everyday power across a broad range of electronic and control applications.

Confirm the required battery dimensions, terminal configuration, charging voltage, charge current and equipment specifications before installation to ensure the Predator ES1250 is correct for your application.