Orion 12V to 24V-10A Adjustable DC-DC Converter

⚡ ORION 12V TO 24V-10A DC-DC CONVERTER – ADJUSTABLE OUTPUT IP20

12V to Adjustable 20–30V Non-Isolated DC-DC Converter – 10A Continuous Output, 20A Maximum Output, 95% Efficiency & Parallel Capability

⚡ The Orion 12V to 24V-10A DC-DC Converter is designed to step up a compatible nominal 12V DC supply to an adjustable higher-voltage output for compatible 24V electrical equipment and battery systems.

Accepting an input voltage from 9V to 18V DC, the Orion provides an adjustable output from 20V to 30V, with the supplied specification showing a factory/set value of 26.4V.

The converter provides 10A continuous output current and up to 20A maximum output current, with a supplied efficiency of 95%.

Its adjustable output also allows the converter to be used in compatible battery-charging applications, while up to five suitable units can be connected in parallel where additional output-current capability is required.

The unit uses 6.3mm Faston-tab DC connections and is supplied with four insulated female Faston crimp terminals for installation.

---

⚡ KEY FEATURES

🔌 12V to 24V DC Conversion
Designed to provide a higher-voltage DC output from a compatible nominal 12V electrical supply.

🎛️ Adjustable 20–30V Output
Output voltage can be adjusted using the onboard potentiometer across the supplied 20V to 30V range.

⚡ 10A Continuous Output
Provides up to 10A continuous output current for compatible higher-voltage electrical loads.

🚀 20A Maximum Output
Maximum output current is listed at 20A.

📈 95% Efficiency
Provides high-efficiency DC conversion with a supplied efficiency rating of 95%.

🔋 Battery-Charging Capability
The supplied product information states that models with adjustable output can also be used to buffer-charge a compatible battery.

🔗 Parallel Operation
Up to five suitable converters can be connected in parallel to increase total available output current.

⚡ Under-Voltage Protection
Shuts down at a supplied 8V input and restarts at 10V.

🔩 6.3mm Faston Connections
Uses Faston-tab DC connections for straightforward electrical installation.

📦 Faston Terminals Included
Delivery includes four insulated 6.3mm female Faston crimp terminals.

🌡️ -20°C to +55°C Operating Range
Designed to operate across a broad ambient-temperature range.

📏 Compact 45 × 90 × 125mm Design
Compact enclosure suitable for compatible vehicle, industrial and auxiliary electrical installations.

---

🔌 STEP UP 12V DC TO A HIGHER VOLTAGE

The Orion is designed for systems where a nominal 12V DC supply is available but connected equipment requires approximately 24V DC.

Input voltage range: 9V–18V DC

Adjustable output range: 20V–30V DC

Supplied set value: 26.4V

This adjustable design allows the output to be configured for compatible equipment rather than being restricted to one fixed output voltage.

⚠️ IMPORTANT: Confirm the required voltage of the connected equipment before adjusting or connecting the converter. Excessive output voltage can damage 24V equipment.

---

🎛️ ADJUSTABLE 20–30V OUTPUT

The output voltage is adjustable using a potentiometer.

Supplied adjustment range:

20V–30V DC

The technical information supplied for this model shows a set value of 26.4V.

This adjustability can be useful where equipment requires a specific operating voltage or where the converter is being configured for an approved battery-buffering application.

⚠️ IMPORTANT: Measure and set the converter output voltage correctly before connecting sensitive electrical equipment or a battery.

---

⚡ 10A CONTINUOUS OUTPUT

Continuous output current:

10A

Maximum output current:

20A

The 10A continuous-current rating should be used when calculating normal sustained electrical loads.

⚠️ IMPORTANT: The supplied 20A figure is the maximum output-current rating and should not automatically be treated as a continuous operating rating.

---

📈 95% CONVERSION EFFICIENCY

Supplied efficiency:

95%

High conversion efficiency helps reduce unnecessary power losses between the 12V input supply and higher-voltage output.

This is particularly useful in battery-powered systems where energy efficiency and heat management are important.

---

🔋 ADJUSTABLE OUTPUT & BATTERY CHARGING

The supplied product information states that Orion models with adjustable output can also be used as a battery charger or for buffer-charging a compatible battery.

The adjustable 20V–30V output allows the voltage to be configured to suit an approved application.

⚠️ IMPORTANT: The supplied source text includes the example “to charge a 12 Volt starter or accessory battery in an otherwise 24V system.” That generic example does not align clearly with this specific 12V-to-24V step-up model. For this model, confirm the intended battery voltage, charging requirements and current manufacturer instructions before using it as a battery charger.

⚠️ IMPORTANT: A battery requires the correct charging voltage for its chemistry and application. Do not connect a battery until the output voltage has been correctly set and compatibility confirmed.

---

🔗 CONNECT UP TO FIVE UNITS IN PARALLEL

The supplied product information states that adjustable Orion converters can be connected in parallel to increase total output-current capability.

Up to five units can be connected in parallel.

This can provide additional current capacity in systems where one 10A converter does not provide sufficient continuous output.

⚠️ IMPORTANT: Parallel installation should follow the manufacturer's wiring requirements. Correct cable sizing, fuse protection and output-voltage matching are particularly important when multiple converters are operated together.

---

⚡ UNDER-VOLTAGE SHUTDOWN & RESTART

Under-voltage shutdown: 8V

Under-voltage restart: 10V

The converter is designed to shut down when the input voltage falls to the supplied under-voltage threshold and restart once sufficient input voltage is restored.

This helps prevent continued converter operation when the input supply voltage falls outside the intended range.

---

🔩 6.3MM FASTON CONNECTIONS

The Orion uses 6.3mm Faston tabs for its DC electrical connections.

Delivery includes:

4 × Insulated Female Faston Crimp Terminals – 6.3mm

This provides the basic mating terminals required for connection to the converter.

⚠️ IMPORTANT: Correctly crimp the supplied terminals using suitable tools and select cable according to current, cable length, voltage drop and circuit-protection requirements.

---

🔌 NON-ISOLATED CONVERTER

Galvanic isolation:

No

The converter's input and output circuits are not galvanically isolated from one another.

⚠️ IMPORTANT: If the electrical installation requires galvanic separation between the 12V input and higher-voltage output circuits, this non-isolated model is not suitable.

---

🔋 LOW OFF-LOAD CURRENT

Supplied off-load current:

<15mA

This is the current consumed by the converter while it remains powered without supplying a significant connected load.

The effect of this standby current should be considered where the converter remains connected to a battery for extended periods.

---

🌡️ OPERATING TEMPERATURE RANGE

Operating temperature:

-20°C to +55°C

The Orion is designed to operate across this temperature range when installed and operated within its electrical limits.

Fan-assisted cooling:

No

⚠️ IMPORTANT: As the converter does not use fan-assisted cooling, install it where heat can dissipate appropriately and avoid excessive external heat sources.

---

🛡️ IP20 PROTECTION

This Orion converter is identified as an IP20 model.

IP20 means it should be installed in a suitable protected environment and should not be treated as weatherproof or water-resistant.

⚠️ IMPORTANT: Install the converter in a dry, protected location away from rain, water spray and other environmental exposure.

---

🚙 VEHICLE & AUXILIARY ELECTRICAL SYSTEMS

The Orion may suit compatible vehicle and auxiliary-power applications where a nominal 12V supply needs to operate equipment requiring a higher DC voltage.

Potential applications can include compatible:

• 🎛️ 24V control equipment
• 📡 Communications equipment
• 💡 Higher-voltage lighting systems
• 🔌 24V accessories
• 🏗️ Industrial equipment
• 🔋 Approved battery-buffering applications

⚠️ IMPORTANT: Always confirm that the connected equipment can operate from the selected output voltage and remains within the 10A continuous-current rating.

---

🏗️ INDUSTRIAL & CONTROL APPLICATIONS

The adjustable 20V–30V output can make the Orion useful in compatible machinery, industrial equipment and control systems where a nominal 12V supply must be stepped up to a higher operating voltage.

Confirm required voltage, current, electrical isolation and installation environment before use.

---

📏 COMPACT DIMENSIONS

Height: 45mm

Width: 90mm

Depth: 125mm

Weight: Approximately 0.4kg

The compact enclosure allows the converter to be integrated into suitably protected electrical cabinets, vehicles and equipment installations.

---

📋 TECHNICAL SPECIFICATIONS

Product: Orion 12V to 24V-10A DC-DC Converter

Converter type: Step-up DC-DC voltage converter

Ingress protection: IP20

Input voltage range: 9V–18V DC

Under-voltage shutdown: 8V

Under-voltage restart: 10V

Output voltage adjustment: Yes – potentiometer

Output voltage range: 20V–30V DC

Supplied set value: 26.4V

Efficiency: 95%

Suitable to buffer-charge a battery: Yes according to supplied specifications

Parallel connection: Yes

Maximum parallel units: Up to 5 according to supplied product information

Continuous output current: 10A

Maximum output current: 20A

Fan-assisted cooling: No

Galvanic isolation: No

Off-load current: <15mA

Operating temperature range: -20°C to +55°C

DC connection: 6.3mm Faston tabs

Weight: Approximately 0.4kg

Dimensions: 45mm × 90mm × 125mm

---

⚠️ REMOTE ON-OFF SPECIFICATION NOTE

The supplied descriptive copy includes a section titled “Remote on-off connector” and explains how a remote on-off function can eliminate the need for a high-current switch in the input wiring.

However, the supplied technical specification table for this exact model lists:

Remote on-off: No

⚠️ IMPORTANT: Because these two supplied pieces of information conflict, remote on-off functionality should not be assumed for this exact converter. Confirm the current manufacturer datasheet or the physical unit before designing the installation around a remote on-off input.

---

⚠️ INSTALLATION & COMPATIBILITY CHECKLIST

Before purchasing or installing the Orion 12V to 24V-10A converter, confirm that it matches the electrical requirements of your system.

• 9–18V DC input supply
• Required output within the adjustable 20–30V range
• Correct output voltage set before connecting equipment
• Continuous load within the 10A rating
• Maximum-current requirement within the supplied 20A specification
• No requirement for galvanic isolation
• Correct input and output polarity
• Correct cable sizing
• Correct Faston terminal crimping
• Appropriate input and output circuit protection
• Dry, protected installation location suitable for IP20 equipment
• Operating temperature within -20°C to +55°C
• Correct battery charging voltage where buffer charging is intended
• Output-voltage matching where multiple units are connected in parallel

⚠️ IMPORTANT: This is a step-up converter. Its output voltage is higher than its nominal 12V input voltage.

⚠️ IMPORTANT: Confirm output voltage with a suitable meter before connecting sensitive equipment.

⚠️ IMPORTANT: This converter is non-isolated. Do not use it where galvanic isolation is required.

⚠️ IMPORTANT: The unit is IP20 and requires a dry, protected installation location.

---

📦 WHAT’S INCLUDED

⚡ 1 × Orion 12V to 24V-10A DC-DC Converter

🔩 4 × Insulated Female Faston Crimp Terminals – 6.3mm

---

❓ FREQUENTLY ASKED QUESTIONS

What does the Orion 12V to 24V-10A converter do?

It steps up a compatible nominal 12V DC supply to an adjustable higher-voltage output between 20V and 30V.

What is the input voltage range?

The supplied input-voltage range is 9V to 18V DC.

What is the output voltage?

The output is adjustable from 20V to 30V DC. The supplied technical specification shows a set value of 26.4V.

Can I adjust the output voltage?

Yes. The supplied specification states that output voltage is adjustable using a potentiometer.

Is this a 12V to 24V converter?

Yes. It is designed to step a nominal 12V supply up to a voltage suitable for compatible nominal 24V applications.

What is the continuous output current?

The supplied continuous output-current rating is 10A.

What is the maximum output current?

The supplied maximum output current is 20A.

Can I continuously draw 20A?

No. The supplied 20A figure is identified as maximum output current. Normal sustained operation should remain within the 10A continuous rating.

How efficient is the converter?

The supplied efficiency rating is 95%.

What is the under-voltage shutdown point?

The supplied under-voltage shutdown threshold is 8V.

When will it restart after under-voltage shutdown?

The supplied restart voltage is 10V.

Can it be used as a battery charger?

The supplied technical information states that adjustable-output Orion models are suitable for buffer-charging a battery. However, the charging voltage must be correctly configured for the specific battery chemistry and battery-bank voltage.

Can it charge a 12V battery?

The generic supplied descriptive text mentions charging a 12V starter or accessory battery in an otherwise 24V system, but that example does not clearly align with this specific 12V-to-24V step-up model. Confirm the current manufacturer documentation before using this exact model for battery charging.

Can it charge a 24V battery?

The adjustable 20–30V output may make it suitable for certain compatible 24V battery-buffering applications, but the required charging voltage depends on battery chemistry and manufacturer specifications. Confirm compatibility before connection.

Can multiple converters be connected in parallel?

Yes. The supplied information states that adjustable models can be connected in parallel.

How many converters can be paralleled?

The supplied product information allows up to five suitable units to be connected in parallel.

Does it have remote on-off?

The supplied information is conflicting. The descriptive copy discusses a remote on-off connector, while the technical specification table lists “Remote on-off: No.” Remote on-off functionality should therefore be confirmed for this exact model before purchase if that feature is required.

Is the converter galvanically isolated?

No. The supplied specification states that galvanic isolation is not provided.

What does non-isolated mean?

It means the input and output circuits are not electrically separated by galvanic isolation. An isolated converter should be selected where electrical separation is required.

Does it use a cooling fan?

No. The supplied specification states that fan-assisted cooling is not fitted.

What electrical connections does it use?

The converter uses 6.3mm Faston tabs.

Are the matching Faston terminals included?

Yes. The supplied package information states that four insulated female 6.3mm Faston crimp terminals are included.

What is the IP rating?

This model is identified as IP20.

Can it be installed outside?

No. IP20 equipment should be installed in a dry, protected environment and should not be exposed to rain or water spray.

What is the off-load current?

The supplied off-load current is less than 15mA.

What is the operating temperature range?

The supplied operating-temperature range is -20°C to +55°C.

How large is the converter?

The supplied dimensions are 45mm high × 90mm wide × 125mm deep.

How much does it weigh?

The supplied weight is approximately 0.4kg.

Can it run 24V accessories in a 12V vehicle?

Potentially. The converter is designed to step a compatible 12V supply up to an adjustable higher voltage. Confirm that the accessory operates within the 20–30V output range and does not exceed the converter's 10A continuous output rating.

Can it power multiple 24V accessories?

Potentially. Add the current requirements of all connected loads and ensure the combined sustained output remains within the 10A continuous-current rating.

Should I check the output before connecting equipment?

Yes. Because the output is adjustable, verify the output voltage before connecting sensitive equipment or a battery.

Does it require external circuit protection?

Appropriate fuse or circuit-breaker protection should be selected according to cable size, source capability and the complete electrical-system design.

What should I check before ordering?

Confirm the 9–18V input range, required 20–30V output setting, 10A continuous-current requirement, 20A maximum output, need for galvanic isolation, IP20 installation environment, Faston connections, circuit protection and any battery-charging or parallel-operation requirements before purchase.

---

⚡ ADJUSTABLE 12V TO 24V POWER CONVERSION FOR VEHICLE, INDUSTRIAL & AUXILIARY SYSTEMS

Choose the Orion 12V to 24V-10A DC-DC Converter when you need an efficient way to step a nominal 12V supply up to an adjustable higher DC voltage.

With a 9–18V input range, adjustable 20–30V output, 10A continuous-current capability, 20A maximum output, 95% efficiency, parallel capability and compact 45 × 90 × 125mm enclosure, the Orion provides a versatile voltage-conversion solution for compatible vehicle, industrial and auxiliary electrical systems.

Confirm the output-voltage setting, connected load, battery-charging requirements, required isolation, Faston wiring, circuit protection and IP20 installation environment before installation to ensure this Orion converter is correct for your application.