ORICOM
DTX4200XPAPNK Dual Receive UHF Pack | Pink 3dBi Antenna
DTX4200XPAPNK Dual Receive UHF Pack | Pink 3dBi Antenna
SKU:DTX4200XPAPNK
Couldn't load pickup availability
📻 ORICOM DTX4200XPAPNK DUAL RECEIVE UHF CB RADIO + PINK 3dBi ANTENNA VALUE PACK
Limited-Edition Dual Receive Pack with DTX4200XP & ANU856PNK Pink 3dBi Antenna
📡 The Oricom DTX4200XPAPNK Value Pack combines the premium DTX4200XP Dual Receive UHF CB Radio with the distinctive ANU856PNK Pink 3dBi UHF Antenna, delivering serious touring performance with a unique look.
Oricom's Dual Receive technology allows the DTX4200XP to receive two different UHF channels at the same time. Stay connected with your convoy on one channel while simultaneously monitoring another important channel such as highway Channel 40.
The professional-grade controller speaker microphone features an extra-large display, intuitive jog wheel and built-in speaker, while a second speaker in the transceiver provides loud and clear received audio. The included 3dBi pink antenna is designed for touring applications where a broader radiation pattern can be beneficial through hilly and changing terrain.
⚡ KEY FEATURES
👂 Dual Receive – Hear 2 Channels at Once
Receive two separate UHF channels simultaneously without needing two radios.
💗 ANU856PNK Pink 3dBi Antenna Included
Distinctive detachable antenna designed to combine touring performance with a bold pink finish.
📻 Full 5 Watt UHF CB Output
Maximum 5 Watt transmit power across the Australian 80-channel UHF CB system.
🔊 Dual-Speaker Audio
Speakers in both the controller microphone and transceiver provide strong, clear received audio.
🎙️ Professional-Grade Controller Microphone
Large ergonomic microphone with speaker, display and primary controls directly in hand.
🎛️ Intuitive Jog Wheel
Provides easy access to primary radio functions and menu navigation.
🌈 Large 96-Colour Backlit Display
Extra-large display with adjustable brightness for easy viewing in changing light conditions.
⚡ Fast 80-Channel Scanning
Scans all 80 UHF CB channels in under three seconds.
🛡️ Heavy-Duty Die-Cast Chassis
Built for demanding Australian touring and vehicle environments.
💦 IP54 Dust & Splash Resistance
The supplied product description identifies the chassis as IP54 rated for resistance to dust and splashes.
🔐 38 CTCSS & 104 DCS Codes
Provides extensive selective-squelch options for compatible group communications.
📶 Duplex Repeater Capability
Supports compatible UHF CB repeater operation.
🔌 2m Microphone Extension Cable Included
Provides additional flexibility when locating the transceiver away from the controller microphone.
🛡️ 5 Year Radio Warranty
The DTX4200XP is backed by a five-year warranty.
📡 3 Year Antenna Warranty
The ANU856PNK antenna is backed by a three-year warranty.
👂 DUAL RECEIVE – MONITOR TWO CHANNELS AT ONCE
Dual Receive is one of the major advantages of the DTX4200XP.
For example, you can:
- 🚙 Talk with your convoy on Channel 64
- 🚛 Monitor highway Channel 40 at the same time
This provides a major convenience advantage when touring because you can remain connected with your group without giving up monitoring of another important UHF channel.
💗 ANU856PNK 3dBi PINK UHF ANTENNA
The included ANU856PNK combines a distinctive pink finish with a 3dBi antenna configuration suited to general touring and varied terrain.
A 3dBi antenna generally produces a broader vertical radiation pattern than higher-gain antennas, which can make it particularly useful through hills and undulating country.
Antenna features include:
- 💗 Pink finish
- 📡 3dBi gain
- 📏 665mm overall antenna length including spring base
- 🔌 4.5m low-loss coaxial cable
- 🔌 Pre-terminated FME connector
- 🔧 PL259 adaptor
- 🛡️ 3 year warranty
⚠️ Actual communication range depends on terrain, antenna mounting position, surrounding obstacles, installation quality and repeater availability.
🎙️ LOUD, CLEAR CONTROLLER-MICROPHONE DESIGN
The DTX4200XP uses speakers in both the professional-grade controller microphone and main transceiver to improve received-audio volume and clarity.
The larger controller microphone incorporates an extra-large display and intuitive jog wheel, allowing the transceiver to be installed in a suitable protected location while keeping the primary radio controls conveniently accessible.
📦 PACKAGE CONTENTS
- 📻 Oricom DTX4200XP Dual Receive UHF CB Radio
- 🎙️ Professional-Grade Controller Speaker Microphone
- 🔌 2m Microphone Extension Cable
- 🛠️ Slide-In Mounting Bracket
- 🔧 Radio Mounting Hardware
- 💗 Oricom ANU856PNK 3dBi Pink UHF Antenna
- 🔌 4.5m Low-Loss Coaxial Cable
- 🔌 Pre-Terminated FME Connector
- 🔧 PL259 Adaptor
📋 TECHNICAL SPECIFICATIONS
Brand: Oricom
Pack Model: DTX4200XPAPNK
Radio Model: DTX4200XP
Antenna Model: ANU856PNK
Dual Receive: Yes
RF Output Power: 5 Watts Maximum
UHF CB Channels: 80 – 75 Voice Channels
Frequency Range TX/RX: 476.425–477.4125MHz
Channel Spacing: 12.5kHz
Operating Modes: Simplex / Repeater
Repeater TX Offset: +750kHz
Scanning Speed: 50ms Per Channel
Antenna Impedance: 50 Ohms
CTCSS Codes: 38
DCS Codes: 104
Display: Large 96-Colour Backlit Display
Backlight Brightness: Adjustable
External Speaker Connection: 3.5mm Jack
Transmit Power Indicator: Yes
Auto Power-Off: Yes
Transceiver Chassis: Heavy-Duty Die-Cast
Ingress Protection: IP54 – As Described in Supplied Product Information
Operating Voltage Range: 10–15V DC
Over-Voltage Protection: Diode & Voltage Regulator System
Over-Current Protection: 2A Fuse
Reverse-Polarity Protection: Shunt Diode
Frequency Stability: ±5ppm
Transmit Current Consumption: Approximately 1.7A with 50-Ohm Antenna Termination
Modulation: F3E / FM
Maximum Deviation: 2.5kHz
Spurious Emissions: <-30dBm
Receiver Type: Dual Conversion Superheterodyne
Main RX Intermediate Frequencies: 21.4MHz / 450kHz
Sub RX Intermediate Frequencies: 38.85MHz / 455kHz
Receiver Sensitivity: <-123dBm at 12dB SINAD
Audio Output Power: >2 Watts at 8 Ohms
Signal-to-Noise Ratio: >40dB
Transceiver Dimensions (H × W × D): 31 × 128 × 147mm
Transceiver Weight: 548g
Microphone Weight: 700g
Radio Warranty: 5 Years
Antenna Gain: 3dBi
Antenna Length: 665mm Including Spring Base
Coaxial Cable Length: 4.5m
Antenna Connector: Pre-Terminated FME
PL259 Adaptor: Included
Antenna Warranty: 3 Years
Compliance: AS/NZS 4365:2011
🔧 INSTALLATION CONSIDERATIONS
- Confirm the correct nominal supply-voltage specification with Oricom due to the conflicting 3.8V listing
- The supplied operating range is stated as 10–15V DC
- Retain the specified 2A fuse protection
- Use a secure protected location for the 31 × 128 × 147mm transceiver
- Plan the supplied 2m microphone extension-cable route before installation
- Allow sufficient clearance for the 665mm antenna including spring base
- Route the 4.5m antenna coax away from excessive heat, sharp edges and moving components
❓ FREQUENTLY ASKED QUESTIONS
What does Dual Receive do?
It allows the DTX4200XP to receive two separate UHF channels at the same time, such as your convoy channel and highway Channel 40.
Is Dual Receive the same as scanning?
No. Scanning moves through channels searching for activity. Dual Receive allows two selected channels to be received simultaneously.
What terrain is the 3dBi antenna best suited to?
A 3dBi antenna is particularly attractive for mixed, hilly and undulating terrain because of its broader radiation pattern compared with higher-gain touring antennas.
Is 3dBi better than 6.5dBi?
It depends on the terrain. A 3dBi antenna can perform well through hills and changing elevations, while a 6.5dBi antenna is generally more suited to flatter open country.
How long is the pink antenna?
The ANU856PNK is listed at approximately 665mm overall including the spring base.
How much antenna cable is included?
Approximately 4.5 metres of low-loss coaxial cable is included.
Can I hide the radio transceiver?
Yes. The controller-microphone design allows the 31 × 128 × 147mm transceiver to be mounted in a suitable protected location away from the main dashboard area.
Are CTCSS and DCS secure or private?
No. They provide selective-squelch functionality but do not encrypt UHF CB communications.
Can I connect an external speaker?
Yes. A 3.5mm jack is provided for a compatible optional external speaker.
How long are the warranties?
The DTX4200XP radio is backed by a five-year warranty, while the ANU856PNK antenna is listed with a three-year warranty.
What should I check before buying?
Confirm the radio's correct supply-voltage specification, ensure the transceiver fits your intended mounting position and check that the 665mm 3dBi antenna suits your preferred mounting location and typical terrain.
💗 SERIOUS DUAL RECEIVE PERFORMANCE WITH A DIFFERENT LOOK
The Oricom DTX4200XPAPNK combines premium Dual Receive UHF performance with a distinctive 3dBi pink touring antenna.
With full 5 Watt output, loud dual-speaker audio, an extra-large controller-microphone display, fast scanning and a complete 4.5m antenna cable package, it delivers the performance required for serious touring while adding some personality to your 4WD setup.
Share

SS - Product Addons
Select product(s) to see addons appear.
This message only appears in theme editor.