Skip to product information
1 of 17

THUMPER

THUMPER REDARC DC-DC DELUXE BATTERY BOX + THUMPER 120AH LITHIUM + TUR-L KIT

THUMPER REDARC DC-DC DELUXE BATTERY BOX + THUMPER 120AH LITHIUM + TUR-L KIT

SKU:BBG-DX+TL-120+TUR-L-8

Regular price $1,689.00
Regular price Sale price $1,689.00
Sale Sold out

Tax included. Shipping calculated at checkout.
Designed for both AGM/GEL & Lithium Chemistry 
  • The box runs a sensor wire in the lid to change between the chemistry of battery (simply disconnect or reconnect one wire to change the charging profile)
The charger is mounted to the top of the Battery box and internally wired with circuit breaker protection to protect all connections
Simply drop your battery into the box and connect only two wires from the box direct to your battery terminals.
Available to purchase in multiple packages - please see listing options

 

Battery Box REDARC DC | LITHIUM & AGM | Thumper
This particular listing suits a DUAL CHEMISTRY of both LITHIUM & AGM:

Comprising of:
1

Redarc BCDC1225D 25Amp DC Battery charger (solar and vehicle compatible charge)

- suitable for Lithium / Gel / AGM / Calcium  

2 Marine grade Cigarette socket - rated to 16 Amps
Includes rubber cap design to protect all sockets
1

Engel Fridge type socket (2 prong design) - rated to 16 Amps

1 Dual USB socket - rated to 2.2Amp (min rating)
- used to illuminate the Volt meter gauge and activate the USB
2 50 Amp Anderson connectors - Labelled INPUT/OUTPUT
(one fitted to front of box and one on rear) 
1 50 Amp Anderson connectors - designed purely for solar panel input - labelled "Unregulated solar input"
1 50 Amp Anderson connectors - designed purely for vehicle (alternator) input - labelled "Alternator input"
1 All internal cabling to allow you to simply connect straight to the battery terminals
1 Internal 50 Amp shunt
1 Comprehensive Battery monitor screen
1 Over-ride switch for low voltage activation
1 2.1mm Inlet / Outlet connection


Break down of sockets:


Internal Dimensions:
Length
330 mm
Width 183 mm
Height 220 mm (base only - lid allows for further height)

External Dimensions:
Length
410 mm
Width 260 mm
Height 280 mm
* Dimensions includes all protruding outlet sockets *

Thumper Lithium 120AH LiFePO4 Battery

Thumper Lithium LiFePO4 batteries are fully sealed and are designed to be mounted on any angle for easy application.

Equipped with an internal battery management system (BMS), the Thumper Lithium offers safe charging and discharging with over temperature protection, under and over voltage cut off protection and also internal short circuit protection.

The LiFePO4 range of batteries are less than half the weight of a traditional AGM battery, whilst still offering all of the benefits of a heavy duty deep cycle.

These batteries are designed to hold the terminal voltage higher throughout each cycle, resulting in an increase depth of discharge and a longer overall run time with heavier draw appliances.

Features:

• Less than half the weight of a traditional lead acid battery
• Higher voltage maintained for longer run times with appliances
• Proven quality and reliability
• Compatible with chargers with an AGM or lithium setting
• For best results: Use of a lithium charger is recommended
• 5 year warranty
• Increased cycles compared to traditional lead acid
 Designed to be wired as parallel OR series
• Parallel connection is non-limited
• Max series voltage is 48 Volt (max 4 series)
• This battery is NOT designed for starting purposes
• This battery is NOT designed for under bonnet application

Technical Specifications:

Model No. TL-120P
Nominal Voltage 12.8 V
Rated Capacity 120 AH
Cell Type / Chemistry Prismatic / LiFePO4

 

Dimensions and Weight:

Length 328 mm
Width 172 mm
Height (Total) 220 mm
Weight 13.8 Kg

 

Operating Temperature Range:

BMS High temp cut out / Reconnect 80˚C   /   50˚C 
Discharge -20˚C ~ 60˚C
Charge -20˚C ~ 45˚C
Storage -5˚C ~ 35˚C

 

Charging Methods:

Recommended Charge Current 10 ~ 50 Amps
Max Charge Current 80 Amps

 

Discharge:

Max discharge current (continuous) 100 Amps
Peak discharge current (1-3 seconds) 300 Amps
BMS Current cut off >100.5A 10s
BMS Current cut off >120.0A 3s
BMS Current cut off >150.0A 1s
BMS Voltage cut off / Reconnect 10.0V    /     12.0V
Self Discharge per month: ≤3%
Warranty 5 years from date of purchase | as of June 2023

 

TUR-L KIT

The Battery Box Loom includes:(TUR-LOOM-8mm)
1
Relay mount (100 Amp Relay / Midi Fuse Holder / Midi Fuse)
1
6mt 8mm twin core (8B&S) automotive cable
1
Anderson to rear box wired in 8mm (optional to fit)
1
Anderson to Anderson 1mt connecting cable (8mm)
2
Pk5 zip ties
3
Fuse Tap options (Micro / Micro2 / Mini Fuse)
1
Assortment of lugs, cable joiners and screws

Image of TUR-L vehicle wiring loom

Thumper REDARC MODEL (Deluxe version)
MADE IN SOUTH AUSTRALIA BY BLUE APPLE THUMPER
View full details