Skip to product information
1 of 15





Regular price $1,462.05
Regular price $1,539.00 Sale price $1,462.05
Sale Sold out
Tax included. Shipping calculated at checkout.
Designed for both AGM/GEL & Lithium Chemistry 
  • The box runs a sensor wire in the lid to change between the chemistry of battery (simply disconnect or reconnect one wire to change the charging profile)
The charger is mounted to the top of the Battery box and internally wired with circuit breaker protection to protect all connections
Simply drop your battery into the box and connect only two wires from the box direct to your battery terminals.
Available to purchase in multiple packages - please see listing options


Battery Box REDARC DC | LITHIUM & AGM | Thumper
This particular listing suits a DUAL CHEMISTRY of both LITHIUM & AGM:

Comprising of:

Redarc BCDC1225D 25Amp DC Battery charger (solar and vehicle compatible charge)

- suitable for Lithium / Gel / AGM / Calcium  

2 Marine grade Cigarette socket - rated to 16 Amps
Includes rubber cap design to protect all sockets

Engel Fridge type socket (2 prong design) - rated to 16 Amps

1 Dual USB socket - rated to 2.2Amp (min rating)
- used to illuminate the Volt meter gauge and activate the USB
2 50 Amp Anderson connectors - Labelled INPUT/OUTPUT
(one fitted to front of box and one on rear) 
1 50 Amp Anderson connectors - designed purely for solar panel input - labelled "Unregulated solar input"
1 50 Amp Anderson connectors - designed purely for vehicle (alternator) input - labelled "Alternator input"
1 All internal cabling to allow you to simply connect straight to the battery terminals
1 Internal 50 Amp shunt
1 Comprehensive Battery monitor screen
1 Over-ride switch for low voltage activation
1 2.1mm Inlet / Outlet connection

Break down of sockets:

Internal Dimensions:
330 mm
Width 183 mm
Height 220 mm (base only - lid allows for further height)

External Dimensions:
410 mm
Width 260 mm
Height 280 mm
* Dimensions includes all protruding outlet sockets *

Thumper Lithium 100AH LiFePO4 Battery

Thumper Lithium LiFePO4 batteries are fully sealed and are designed to be mounted on any angle for easy application.

Equipped with an internal battery management system (BMS), the Thumper Lithium offers safe charging and discharging with over temperature protection, under and over voltage cut off protection and also internal short circuit protection.

The LiFePO4 range of batteries are less than half the weight of a traditional AGM battery, whilst still offering all of the benefits of a heavy duty deep cycle.

These batteries are designed to hold the terminal voltage higher throughout each cycle, resulting in an increase depth of discharge and a longer overall run time with heavier draw appliances.


• Less than half the weight of a traditional lead acid battery
• Higher voltage maintained for longer run times with appliances
• Proven quality and reliability
• Compatible with chargers with an AGM or lithium setting
• For best results: Use of a lithium charger is recommended
• 5 year warranty
• Increased cycles compared to traditional lead acid
• Designed to be wired parallel
 Parallel connection is non-limited
• This battery is NOT designed for series linking
• This battery is NOT designed for starting purposes
• This battery is NOT designed for under bonnet application

Technical Specifications:

Model No. TL-100P
Nominal Voltage 12.8 V
Rated Capacity 100 AH
Cell Type / Chemistry Prismatic / LiFePO4


Dimensions and Weight:

Length 328 mm
Width 172 mm
Height (Total) 220 mm
Weight 11.2 Kg


Operating Temperature Range:

BMS High temp cut out / Reconnect 80˚C   /   50˚C 
Discharge -20˚C ~ 60˚C
Charge -20˚C ~ 45˚C
Storage -5˚C ~ 35˚C


Charging Methods:

Recommended Charge Current  10 ~ 50 Amps
Max Charge Current 70 Amps



Max discharge current (continuous)  100 Amps
Peak discharge current (1-3 seconds) 300 Amps
BMS Current cut off >100.5A 10s
BMS Current cut off >120.0A 3s
BMS Current cut off >150.0A 1s
BMS Voltage cut off / Reconnect 10.0V    /     12.0V
Self Discharge per month: ≤3%
Warranty 5 years from date of purchase | as of June 2023

Thumper Battery Box Tray

The Tray has been designed with several mounting holes at the bottom of the tray to allow for a secure fit to the vehicle or camper trailer.

The set up comes equipped with 4 x steel 'hold down rods' and locking nuts, which perfectly secure through the side handles of the Thumper box.

As the Thumper box is designed with the 'Quick connect' lid to secure the lid to the battery base, this tray now offers a secure way to fasten your battery base to the vehicle with complete safety in mind.

This introduction to the range allows for a complete set up, which remains easy to remove if and when the need arises. 
Weight: 686 grams
Package Includes: 1 x Battery Tray
4 x Steel Rods with lock nut secured already
4 x Adjustable lock nuts
Battery Box dimensions to suit box:
L 332 x W 188mm

Thumper REDARC MODEL (Deluxe version)

View full details