Skip to product information
1 of 16

THUMPER

THUMPER REDARC CLASSIC BATTERY BOX + THUMPER LITHIUM 170AH + 8MM CIRCUIT BREAKER LOOM KIT

THUMPER REDARC CLASSIC BATTERY BOX + THUMPER LITHIUM 170AH + 8MM CIRCUIT BREAKER LOOM KIT

SKU:BBRCLASSIC+TL-170+LCB

Regular price $1,839.00
Regular price Sale price $1,839.00
Sale Sold out

Tax included. Shipping calculated at checkout.
This model battery box has been designed to suit all battery chemistries.
Altering the charging profile from AGM / GEL to LITHIUM is now as simple as changing one spade connection inside the lid of this battery box and that's it!

Key Features:
Built with the Redarc BCDC25D DC charger
Designed to suit new model vehicles with smart / variable alternators
Also compatible with older model vehicles
Will increase low voltage output from vehicle output to allow battery to reach 100%
Will act to isolate from the vehicle's main battery once ignition has been switched off
Designed with an independent Anderson connector for vehicle input
Designed with an independent Anderson connector for solar panel input (regulated connection - up to 400-450watts of solar)
Internally wired and protected with circuit breaker protection, allowing for an easy connection direct to the battery
Equipped with multiple outlet sockets for running 12 Volt appliances
Available in multiple packages with and without wiring looms / mounting trays and battery.


This particular model suits a DUAL CHEMISTRY of both Lithium & AGM:

Comprising of:
1

Redarc BCDC1225D 25Amp DC Battery charger (solar and vehicle compatible charge)

- suitable for Lithium / Gel / AGM / Calcium  

2 Marine grade Cigarette socket - rated to 16 Amps
Includes rubber cap design to protect all sockets
1

Engel Fridge type socket (2 prong design) - rated to 16 Amps

1 Dual USB socket - rated to 2.2Amp (min rating)
- used to illuminate the Volt meter gauge and activate the USB
2 50 Amp Anderson connectors - Labelled INPUT/OUTPUT
(one fitted to front of box and one on rear) 
1 50 Amp Anderson connectors - designed purely for solar panel input - labelled "Unregulated solar input"
1 50 Amp Anderson connectors - designed purely for vehicle (alternator) input - labelled "Alternator input"
1 All internal cabling to allow you to simply connect straight to the battery terminals
1 3 year manufacturing warranty

Internal Dimensions:
Length
330 mm
Width 183 mm
Height 220 mm (base only - lid allows for further height)

External Dimensions:
Length
410 mm
Width 260 mm
Height 280 mm
* Dimensions includes all protruding outlet sockets *

THUMPER LITHIUM 170AH LiFePO4 BATTERY 

Thumper Lithium LiFePO4 batteries are fully sealed and are designed to be mounted on any angle for easy application.

Equipped with an internal battery management system (BMS), the Thumper Lithium offers safe charging and discharging with over temperature protection, under and over voltage cut off protection and also internal short circuit protection.

The LiFePO4 range of batteries are less than half the weight of a traditional AGM battery, whilst still offering all of the benefits of a heavy duty deep cycle.

These batteries are designed to hold the terminal voltage higher throughout each cycle, resulting in an increase depth of discharge and a longer overall run time with heavier draw appliances.

Features:

• Less than half the weight of a traditional lead acid battery
• Higher voltage maintained for longer run times with appliances
• Proven quality and reliability
• Compatible with chargers with an AGM or lithium setting
• For best results: Use of a lithium charger is recommended
• 3 year warranty
• Increased cycles compared to traditional lead acid
 Designed to be wired as parallel OR series
• Parallel connection max 4 cells 
• Max series voltage is 48 Volt (max 4 series)
• This battery is NOT designed for starting purposes
• This battery is NOT designed for under bonnet application

Technical Specifications:

Model No.  TL-170
Nominal Voltage 12.8 V
Rated Capacity 170 AH
Cell Type / Chemistry Prismatic / LiFePO4

 

Dimensions and Weight:

Length 328 mm
Width 172 mm
Height (Total) 215 mm (total height with terminals 230mm)
Weight 15.2 Kg

 

Operating Temperature Range:

BMS High temp cut out / Reconnect 80˚C   /   50˚C 
Discharge -20˚C ~ 60˚C ± 25% Relative Humidity
Charge 5˚C ~ 45˚C ± 25% Relative Humidity
Storage 0˚C ~ 40˚C ± 25% Relative Humidity

 

Charging Methods:

Recommended Charge Current 10 ~ 50 Amps
Max Charge Current 80 Amps

 

Discharge:

Max discharge current (continuous) 150 Amps
Peak discharge current (1-3 seconds) 480 Amps
BMS Voltage cut off 10.0 V
BMS  Reconnect >10.80V
Self Discharge per month: ≤3%
Warranty 3 years from date of purchase

LOOM KIT

This cable is designed to allow you to fit your own Anderson connector from your battery.

  1. Simply mount the Anderson connector (for example on the rear of the vehicle / or on the front of the Caravan A-frame).
  2. Feed the cable length back to the battery location
  3. Connect your negative (black wire) directly to the negative of the battery
  4. Fit the Circuit breaker (provided) in line of the positive (red cable), as close the battery location as possible.

The circuit breaker will act to protect the line (similar to a fuse). If there is a fault on the line, the circuit breaker will 'trip' until the fault has been remedied. It will 'automatically reset' itself once the fault is no longer present.

Specifications:

  • Cable = 8mm automotive cable - rated to approx. 75 Amps over 5-6mt
  • Anderson = 50 Amp Genuine Anderson connector (Uni-sex)
  • Circuit breaker = 50 Amp automatic reset circuit breaker
View full details