Skip to product information
1 of 16

THUMPER

THUMPER PROJECTA DC-DC LITHIUM BATTERY BOX + THUMPER 170AH LITHIUM + 8MM CIRCUIT BREAKER LOOM KIT + TRAY

THUMPER PROJECTA DC-DC LITHIUM BATTERY BOX + THUMPER 170AH LITHIUM + 8MM CIRCUIT BREAKER LOOM KIT + TRAY

SKU:BBPL+TL-170+LCB+T

Regular price $1,729.00
Regular price Sale price $1,729.00
Sale Sold out

Tax included. Shipping calculated at checkout.
This unique battery box design is packed with numerous features and outlet sockets to accommodate for every individual. Please feel free to browse our range for a battery box that will suit your application.

Key Features:
  • Built with the Projecta IDC25L DC charger
  • Designed to suit new model vehicles with smart / variable alternators
  • Also compatible with older model vehicles
  • Will increase low voltage output from vehicle output to allow battery to reach 100%
  • Will act to isolate from the vehicle's main battery once ignition has been switched off
  • Designed with an independent Anderson connector for vehicle input
  • Designed with an independent Anderson connector for solar panel input (regulated connection - up to 400-450watts of solar)
  • Internally wired and protected with circuit breaker protection, allowing for an easy connection direct to the battery
  • Equipped with multiple outlet sockets for running 12 Volt appliances
  • Available in multiple packages with and without wiring looms / mounting trays and battery.



This particular listing is for a Lithium model battery box including:

1 x Projecta IDC25L lithium model 25Amp DC Battery charger (solar and vehicle compatible charge)

2 x Marine grade Cigarette type socket - rated to 16 Amps
Includes rubber cap design to protect all sockets

1 x Engel Fridge type socket (2 prong design) - rated to 16 Amps

1 x Dual USB socket - rated to 2.5Amp (min rating)
- used to illuminate the Volt meter gauge and activate the USB

2 x 50 Amp Anderson connectors - Labelled INPUT/OUTPUT
(one fitted to front of box and one on rear) 

1 x 50 Amp Anderson connectors - designed purely for solar panel input - labelled "Unregulated solar input"

1 x 50 Amp Anderson connectors - designed purely for vehicle (alternator) input - labelled "Alternator input"

- All internal cabling to allow you to simply connect straight to the battery terminals

Internal Dimensions of Battery Box
Length - 330mm
Width - 183mm
Height - 220 mm (base only - lid allows for further height)



External Dimensions of Battery Box
Length - 410mm
Width - 260mm
Height - 280mm
* Dimensions includes all protruding outlet sockets *


 

THUMPER LITHIUM 170AH LiFePO4 BATTERY

Thumper Lithium LiFePO4 batteries are fully sealed and are designed to be mounted on any angle for easy application.

Equipped with an internal battery management system (BMS), the Thumper Lithium offers safe charging and discharging with over temperature protection, under and over voltage cut off protection and also internal short circuit protection.

The LiFePO4 range of batteries are less than half the weight of a traditional AGM battery, whilst still offering all of the benefits of a heavy duty deep cycle.

These batteries are designed to hold the terminal voltage higher throughout each cycle, resulting in an increase depth of discharge and a longer overall run time with heavier draw appliances.

Features:

• Less than half the weight of a traditional lead acid battery
• Higher voltage maintained for longer run times with appliances
• Proven quality and reliability
• Compatible with chargers with an AGM or lithium setting
• For best results: Use of a lithium charger is recommended
• 3 year warranty
• Increased cycles compared to traditional lead acid
 Designed to be wired as parallel OR series
• Parallel connection max 4 cells 
• Max series voltage is 48 Volt (max 4 series)
• This battery is NOT designed for starting purposes
• This battery is NOT designed for under bonnet application

Technical Specifications:

Model No.  TL-170
Nominal Voltage 12.8 V
Rated Capacity 170 AH
Cell Type / Chemistry Prismatic / LiFePO4

 

Dimensions and Weight:

Length 328 mm
Width 172 mm
Height (Total) 215 mm (total height with terminals 230mm)
Weight 15.2 Kg

 

Operating Temperature Range:

BMS High temp cut out / Reconnect 80˚C   /   50˚C 
Discharge -20˚C ~ 60˚C ± 25% Relative Humidity
Charge 5˚C ~ 45˚C ± 25% Relative Humidity
Storage 0˚C ~ 40˚C ± 25% Relative Humidity

 

Charging Methods:

Recommended Charge Current 10 ~ 50 Amps
Max Charge Current 80 Amps

 

Discharge:

Max discharge current (continuous) 150 Amps
Peak discharge current (1-3 seconds) 480 Amps
BMS Voltage cut off 10.0 V
BMS  Reconnect >10.80V
Self Discharge per month: ≤3%
Warranty 3 years from date of purchase

 

LOOM KIT

1 x 6mt length of 8mm twin core cable (8B&S) oxygen free cable
(for vehicle charge line) WITH 50 Amp Anderson fitted

1 x 50Amp Automatic reset circuit breaker
(for connection off main vehicle battery for the charge line)

1 x 50 Amp Anderson connector (Genuine)

1 x 2 Pin ignition wire loom with 6mt cable

 

THUMPER BATTERY BOX TRAY

The Tray has been designed with several mounting holes at the bottom of the tray to allow for a secure fit to the vehicle or camper trailer.

The set up comes equipped with 4 x steel 'hold down rods' and locking nuts, which perfectly secure through the side handles of the Thumper box.

As the Thumper box is designed with the 'Quick connect' lid to secure the lid to the battery base, this tray now offers a secure way to fasten your battery base to the vehicle with complete safety in mind.

This introduction to the range allows for a complete set up, which remains easy to remove if and when the need arises. 

Designed by Blue Apple Thumper for the Thumper battery boxes.

Weight:  686 grams
Package Includes: 1 x Battery Tray
4 x Steel Rods with lock nut secured already
4 x Adjustable lock nuts
Battery Box dimensions to suit box:
L 332 x W 188mm
View full details