Skip to product information
1 of 14

THUMPER

THUMPER PROJECTA DC-DC LITHIUM BATTERY BOX + THUMPER LITHIUM 120AH

THUMPER PROJECTA DC-DC LITHIUM BATTERY BOX + THUMPER LITHIUM 120AH

SKU:BBPL+TL-120

Regular price $1,243.55
Regular price $1,309.00 Sale price $1,243.55
Sale Sold out
Tax included. Shipping calculated at checkout.
This unique battery box design is packed with numerous features and outlet sockets to accommodate for every individual. Please feel free to browse our range for a battery box that will suit your application.

Key Features:
  • Built with the Projecta IDC25L DC charger
  • Designed to suit new model vehicles with smart / variable alternators
  • Also compatible with older model vehicles
  • Will increase low voltage output from vehicle output to allow battery to reach 100%
  • Will act to isolate from the vehicle's main battery once ignition has been switched off
  • Designed with an independent Anderson connector for vehicle input
  • Designed with an independent Anderson connector for solar panel input (regulated connection - up to 400-450watts of solar)
  • Internally wired and protected with circuit breaker protection, allowing for an easy connection direct to the battery
  • Equipped with multiple outlet sockets for running 12 Volt appliances
  • Available in multiple packages with and without wiring looms / mounting trays and battery.



This particular listing is for a Lithium model battery box including:

1 x Projecta IDC25L lithium model 25Amp DC Battery charger (solar and vehicle compatible charge)

2 x Marine grade Cigarette type socket - rated to 16 Amps
Includes rubber cap design to protect all sockets

1 x Engel Fridge type socket (2 prong design) - rated to 16 Amps

1 x Dual USB socket - rated to 2.5Amp (min rating)
- used to illuminate the Volt meter gauge and activate the USB

2 x 50 Amp Anderson connectors - Labelled INPUT/OUTPUT
(one fitted to front of box and one on rear) 

1 x 50 Amp Anderson connectors - designed purely for solar panel input - labelled "Unregulated solar input"

1 x 50 Amp Anderson connectors - designed purely for vehicle (alternator) input - labelled "Alternator input"

- All internal cabling to allow you to simply connect straight to the battery terminals

Internal Dimensions of Battery Box
Length - 330mm
Width - 183mm
Height - 220 mm (base only - lid allows for further height)



External Dimensions of Battery Box
Length - 410mm
Width - 260mm
Height - 280mm
* Dimensions includes all protruding outlet sockets *

THUMPER LITHIUM 120AH LiFePO4 BATTERY

Thumper Lithium LiFePO4 batteries are fully sealed and are designed to be mounted on any angle for easy application.

Equipped with an internal battery management system (BMS), the Thumper Lithium offers safe charging and discharging with over temperature protection, under and over voltage cut off protection and also internal short circuit protection.

The LiFePO4 range of batteries are less than half the weight of a traditional AGM battery, whilst still offering all of the benefits of a heavy duty deep cycle.

These batteries are designed to hold the terminal voltage higher throughout each cycle, resulting in an increase depth of discharge and a longer overall run time with heavier draw appliances.

These batteries are quality! Check out the internal BMS on this battery compared to cheaper brands

Features:

• Less than half the weight of a traditional lead acid battery
• Higher voltage maintained for longer run times with appliances
• Proven quality and reliability
• Compatible with chargers with an AGM or lithium setting
• For best results: Use of a lithium charger is recommended
• 3 year warranty
• Increased cycles compared to traditional lead acid
 Designed to be wired as parallel OR series
Parallel connection is non-limited
• Max series voltage is 48 Volt (max 4 series)
• This battery is NOT designed for starting purposes
• This battery is NOT designed for under bonnet application

Technical Specifications:

Model No. TL-120P
Nominal Voltage 12.8 V
Rated Capacity 120 AH
Cell Type / Chemistry Prismatic / LiFePO4

 

Dimensions and Weight:

Length 328 mm
Width 172 mm
Height (Total) 220 mm
Weight 13.8 Kg

 

Operating Temperature Range:

BMS High temp cut out / Reconnect 80˚C   /   50˚C 
Discharge -20˚C ~ 60˚C
Charge -20˚C ~ 45˚C
Storage -5˚C ~ 35˚C

 

Charging Methods:

Recommended Charge Current 10 ~ 50 Amps
Max Charge Current 80 Amps

 

Discharge:

Max discharge current (continuous) 100 Amps
Peak discharge current (1-3 seconds) 300 Amps
BMS Current cut off >100.5A 10s
BMS Current cut off >120.0A 3s
BMS Current cut off >150.0A 1s
BMS Voltage cut off / Reconnect 10.0V    /     12.0V
Self Discharge per month: ≤3%
Warranty 5 years from date of purchase | as of June 2023
View full details